FC-22 FIRMWARE UPDATING
5 - 6
January 2000 © TOSHIBA TEC
Code
Language
Code
Language
2
Japanese
13
Finnish
3
American English
14
Norwegian
4
English
15
Australian English
5
reserved
16
Polish
6
French
17
Czech
7
German
18
Greek
8
Swedish
19
Romanian
9
Dutch
20
Bulgarian
10
Italian
21
Portuguese
11
Spanish
22
Hungarian
12
Danish
23
reserved
5. Select the area for update using ten keys.
Using [1] to [6] keys and [INTERRUPT] key, you can select a target area.
A selected number is displayed at target area. Press [INTERRUPT] to input "#".
The relation between target area number and firmware data is as follows.
1 : Program data
2 : Fixed UI data
3 : Common UI data
4 : 1st language UI data
5 : 2nd language UI data
6 : 3rd language UI data
#1 : All data (1, 2, 3, 4, 5 and 6)
#2 : All UI data (2, 3, 4, 5 and 6)
#3 : All language UI data (4, 5 and 6)
6.Press [START] key and copier starts to update the data.
Do not turn OFF the power of the copier or the computer, or disconnect the connection
between the copier and computer after pressing the START key.
Interrupting the transmission of a file to the copier will result in corrupting the file in F-
ROM of the copier. If this file is corrupted, you have to re-install the data again.
"Code" provides with following information.
A. In the case of Program data("target" is 1), "code" means the destination.
SUC:
for USA and Canada
SEU:
for European countries
SX:
for Australia and Asian countries
SJP:
for Japan
B. In the case of UI data("target" is 2-6), "code" means Language.
Summary of Contents for FC22
