User’s Manual
EN-75
TOSHIBA FOLIO 100
TOSHIBA FOLIO 100 TV KIT
The TOSHIBA FOLIO 100 TV KIT includes a dock and a remote controller.
The Dock
The dock provides several kinds of ports in addition to the ports available
on your device. It connects directly to the docking interface on the bottom of
your device. The AC adaptor connects this dock to a power source.
The following ports are available on the dock.
(Sample Illustration) The dock
To connect your device with this dock, follow the steps below.
1. Connect the power cord to the AC adaptor.
2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the
rear side of this dock.
3. Plug the power cord into a live wall outlet.
4. Remove the protection rubber at the bottom of your device.
5. Align the docking interface on the bottom of your device with the
docking ports on the dock.
(Sample Illustration) Connect your device with the dock
■
You must connect the AC adaptor before you connect to the dock.
■
When the dock is connected to your device, you can not use the
following ports on your device: DC IN 19V jack and HDMI out port.
1. HDMI out port
2. Universal Serial Bus 2.0 ports
3. DC IN 19V jack
1
2
3