User’s Manual
EN-12
TOSHIBA FOLIO 100
Turning on the power
This section describes how to turn on the power - the
Power/Battery
indicator will then indicate the status.
Press the power button at the top of the device to turn on the power.
(Sample Illustration) Turn on the device
Initial Setup
The Setup Screen will be the first screen displayed when you turn on the
power. Setup your device according to the following steps:
1. In
Language/Date & Time Settings
, choose the language as you want
and then set the time zone, date and time. Tap
Next
to continue.
2. In
Wi-Fi Settings
, turn on the
Wifi
. Choose an available network and
connect to it. Tap
Next
to continue.
You may also skip this section and turn Wifi on later in
Settings
window.
3. In
EULA Agreement
, tap
I accept
and then tap
Finish setup
to
complete the whole setup process.
Device options menu
The device provides you with an option menu where you can quickly
change the mode of your device:
To open the Device options menu, press the power button for about two
seconds. The menu will be displayed with the following options:
Silent
mode
,
Airplane mode
,
Power off
and
Suspend
.
■
After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Please refer to the section
2 PIN
3 PIN