TOSHIBA
Table 1 1 . 1 Startup Procedu res (Cont'd)
3
Press the "RUN" button
[(2) in Figure 9.2 . 1 on
page 25] for 0.5 sec.
BYPASS
UPS STARTING
WAIT FOR A WHILE
6F3H1048
CONVERTER LED is on & I NVERTER LED flashes.
4
Turn on the DC input
breaker
5
Press the "U PS" button
[(5) in Figure 9.2 . 1 on
page 25] for 0.5 sec.*
- This completes the
U PS startup
procedure.
* Notes:
BYPASS
MOVE #72B TO 'ON' POSITION
AC
SWITCH
BATTERI ES LED is on.
UPS SUPPLY
AC-VO 480[V]
AC- I
0
50[%]
SWITCH
BYPASS LED is off & U PS LED is on.
- If the AC switch dose not function, contact Toshiba or authorized representatives.
- If the bypass
source is out of
this operation will be inhibited . I n
order t o
manually, press the
button for 5 seconds or more.
- 37 -
www
. ElectricalPartManuals
. com