manualshive.com logo in svg

Toshiba GA-1121, Management Manual

Introducing the Toshiba GA-1121 Color Manual, a comprehensive guide to maximize your product usage. This essential manual provides step-by-step instructions and valuable tips, ensuring smooth operation. Available for free download at 88.208.23.73:8080, equip yourself with this manual to unleash the full potential of your Toshiba GA-1121.

Share
Download
background image

Part Number: 45040217

Copyright © 2003-2005 Electronics for Imaging, Inc. All rights reserved. 

This publication is protected by copyright, and all rights are reserved. No part of it may be reproduced or transmitted in any form or by any means for any purpose 
without express prior written consent from Electronics for Imaging, Inc. Information in this document is subject to change without notice and does not represent 
a commitment on the part of Electronics for Imaging, Inc. 

This publication is provided in conjunction with an EFI product (the “Product”) which contains EFI software (the “Software”). The Software is furnished under 
license and may only be used or copied in accordance with the terms of the Software license set forth below. 

The Product may be covered by one or more of the following U.S. Patents: 4,917,488, 4,941,038, 5,109,241, 5,150,454, 5,150,454, 5,170,182, 5,212,546, 
5,278,599, 5,335,040, 5,343,311, 5,424,754, 5,467,446, 5,506,946, 5,517,334, 5,537,516, 5,543,940, 5,553,200, 5,565,960, 5,615,314, 5,619,624, 
5,625,712, 5,640,228, 5,666,436, 5,760,913, 5,818,645, 5,835,788, 5,866,856, 5,867,179, 5,959,867, 5,970,174, 5,995,724, 6,002,795, 6,025,922, 
6,041,200, 6,046,420, 6,065,041, 6,067,080, 6,112,665, 6,116,707, 6,118,205, 6,122,407, 6,134,018, 6,141,120, 6,151,014, 6,166,821, 6,184,873, 
6,185,335, 6,201,614, 6,215,562, 6,219,659, 6,222,641, 6,224,048, 6,225,974, 6,226,419, 6,239,895, 6,256,108, 6,265,676, 6,266,051, 6,269,190, 
6,289,122, 6,292,177, 6,292,270, 6,300,580, 6,310,697, 6,323,893, 6,326,565, 6,327,047, 6,327,050, 6,327,052, 6,330,071, 6,331,899, 6,335,723, 
6,340,975, 6,341,017, 6,341,018, 6,341,307, 6,348,978, 6,356,359, 6,369,895, 6,373,003, 6,381,036, 6,400,443, 6,414,673, 6,424,340, 6,429,949, 
6,449,393, 6,456,280, 6,476,927, 6,490,696, 6,501,461, 6,501,565, 6,519,053, D341,131, D406,117, D416,550, D417,864, D419,185, D426,206, 
D430,206, D439,851, D444,793, RE33,973, RE36,947

Trademarks

Bestcolor, ColorWise, EDOX, EFI, Fiery, the Fiery logo, Fiery Driven, RIP-While-Print and Spot-On are registered trademarks of Electronics for Imaging, Inc. 
in the U.S. Patent and Trademark Office and/or certain other foreign jurisdictions. 

The Best logo, the Electronics for Imaging logo, the Fiery Driven logo, the Intelligent Device Management logo, the PrintMe logo, the Splash logo, the Unimobile 
logo, the Velocity OneFlow logo, Everywhere You Go, Changing the Way the World Prints, AutoCal, AutoGray, Best, ColorCal, Command WorkStation, Device 
IQ, DocBuilder, DocBuilder Pro, DocStream, FreeForm, Fiery Link, Fiery Prints, Fiery Spark, Intelligent Device Management, NetWise, PrintMe, PrintMe 
Enterprise, PrintMe Networks, RIPChips, ScanBuilder, SendMe, Splash, Unimobile, Velocity, Velocity Balance, Velocity Build, Velocity Estimate, Velocity 
Exchange, Velocity OneFlow, Velocity Scan, VisualCal, WebInstaller, WebScan, WebSpooler, WebStatus, and WebTools are trademarks of Electronics for Imaging, 
Inc. 

All other terms and product names may be trademarks or registered trademarks of their respective owners, and are hereby acknowledged. 

Legal Notices 

APPLE COMPUTER, INC. (“APPLE”) MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE APPLE SOFTWARE. 
APPLE DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE 
OF THE APPLE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE. THE ENTIRE 
RISK AS TO THE RESULTS AND PERFORMANCE OF THE APPLE SOFTWARE IS ASSUMED BY YOU. THE EXCLUSION OF IMPLIED 
WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. 

IN NO EVENT WILL APPLE, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, 
INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF 
BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE APPLE SOFTWARE EVEN IF APPLE 
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR 
LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. 

Apple’s liability to you for actual damages from any cause whatsoever, and regardless of the form of the action (whether in contract, tort [including negligence], 
product liability or otherwise), will be limited to $50. 

PANTONE® Colors displayed in the software application or in the user documentation may not match PANTONE-identified standards.þ Consult current 
PANTONE Color Publications for accurate color. PANTONE® and other Pantone, Inc. trademarks are the property of Pantone, Inc.þ © Pantone, Inc., 2003. 

Pantone, Inc. is the copyright owner of color data and/or software which are licensed to Electronics for Imaging, Inc.,þto distribute for use only in combination 
with the products, or software of Electronics for Imaging, Inc. þPANTONE Color Data and/or Software shall not be copied onto another disk or into memory 
except as part of the delivery of the Electronics for Imaging, Inc., products or software.

This product includes software developed by the Apache Software Foundation (http://www.apache.org/).

Summary of Contents for GA-1121



















































































































































































































Reviews:

No comments

Related manuals for GA-1121

Canon Pixma MG2400 Series Getting Started Manual preview
Pixma MG2400 Series
Brand: Canon Pages: 2
Canon imagePROGRAF iPF8400 Basic Manual preview
imagePROGRAF iPF8400
Brand: Canon Pages: 157
Canon JX210P On-Screen Manual preview
JX210P
Brand: Canon Pages: 91
Panasonic KX-P8415 Setup And Reference Manual preview
KX-P8415
Brand: Panasonic Pages: 32
Xerox 4520 User Manual preview
4520
Brand: Xerox Pages: 310
Xerox 4215 Operator'S Manual preview
4215
Brand: Xerox Pages: 414
Macherey-Nagel NANOCOLOR UV/VIS II User Manual preview
NANOCOLOR UV/VIS II
Brand: Macherey-Nagel Pages: 6
Olivetti d-COLOR MF254 Replacement Procedure preview
d-COLOR MF254
Brand: Olivetti Pages: 2
Olivetti d-COLOR MF3300 Operations preview
d-COLOR MF3300
Brand: Olivetti Pages: 109
Olivetti d-COLOR MF3300 User Manual preview
d-COLOR MF3300
Brand: Olivetti Pages: 111
Olivetti d-Color MF1600 Setup Manual preview
d-Color MF1600
Brand: Olivetti Pages: 8
Panasonic KX-MC6020 Service Manual preview
KX-MC6020
Brand: Panasonic Pages: 486
Ricoh Aficio 2238C Operating Instructions Manual preview
Aficio 2238C
Brand: Ricoh Pages: 126
Pantum M6500 series Faq preview
M6500 series
Brand: Pantum Pages: 126
Olivetti d-COLOR MF3800 Manual preview
d-COLOR MF3800
Brand: Olivetti Pages: 82
Savin MLP28 Operating Instructions Manual preview
MLP28
Brand: Savin Pages: 299
Xerox WorkCentre Pro 421 System Administrator Manual preview
WorkCentre Pro 421
Brand: Xerox Pages: 162
Xerox 8860MFPD - Multifunction Inkjet Printer Evaluator Manual preview
8860MFPD - Multifunction Inkjet Printer
Brand: Xerox Pages: 16

Brands by name

Popular brands

Load more brands