3-15
3
Replacing GA-1121 board components
VAROITUS:
Paristo voi räjähtää, los se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan suosittelemaan
tyyppiin. Hävitä Käytetty paristo valmistajan ohjeiden mukaisesti.
ADVARSEL:
Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av
apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner.
VARNING:
Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av
apparat-tillverkaren. Kassera använt batteri enligt fabrikantens instruktion.
T
O
REPLACE
THE
BATTERY
1.
Locate the battery on the GA-1121 board socket BT200 (see Figure 3-4 on page 3-8).
2.
Carefully lift up the clip that holds the battery.
Use caution when lifting up the clip; excessive force could cause the clip to lose its
tension.
F
IGURE
3-8
GA-1121 battery
3.
Pull the battery out of its socket and release the clip.
4.
To insert a new battery, slide the battery into the socket under the clip with the positive
(+) side facing up.
Make sure the clip holds the battery securely in the socket.
5.
Reassemble the GA-1121 and verify functionality (see page 3-22).
N
OTE
:
When you power on, let the start-up diagnostics complete, then power off and
power on again to initialize the realtime clock.
The date and time of day are lost when the old battery is removed. See the GA-1121 user
documentation for instructions on entering Server Setup to program the system date and
time.
Battery
+
Socket
Clip
