GA-1170
TROUBLE CODE
6 – 1
[ 6 ] TROUBLE CODE
1. TROUBLE CODE (CE CODE)
If "CE" blinks in the display, press the [START] key. An error code will
appear.(Only e-STUDIO162/162D, e-STUDIO151/151D displays an error
code automatically.) Solve the problem as explained below.
Error Code
Solution
CE-00
Error which cannot be specified occurred.
Turn off the power and turn it back on. Consult with
your network administrator to make sure that no prob-
lems exist on the network or in the server.
CE-01
Network Server card error.
Turn off the power and turn it back on. Consult with
your network administrator to make sure that no prob-
lems exist on the network or in the server.
CE-02
Server access denied. The scanned image was not
sent because a connection to the server could not be
established. Make sure that the SMTP server settings
or FTP server settings in the Web page are correct.
CE-03
The scanned image was not sent because the server
was busy or there was too much traffic. Wait briefly and
then try again.
CE-04
It has not logged in to the FTP server and the mail
server. Please reconfirm the login name and a pass-
word.
CE-05
The scanned image was not sent because the directory
of the destination FTP server was not correct. Make
sure that the correct FTP server information is config-
ured in the Web page.
CE-09
The size of the scanned image file exceeds the upper
limit set in "Maximum Size of File" in the Web page.
Reduce the number of original pages scanned into the
file, or change the upper limit set in "Maximum Size of
File".
CE-10
A transmission method assigned to a [SCAN MENU]
key cannot be used. Check the transmission methods
assigned to the [SCAN MENU] keys in "Enable Scan-
ner Delivery to:" in the Web page whether or not the
method can be used.
CE-11
The memory filled with scanner data.
It was not able to process by the size of a scanner data
being too large.
Please drop resolution of data by setup of scaner and
retry scan.
CE-12
The quantity of the result for which LDAP searched
e x c e e d e d th e m a x i m u m q u a n ti t y w h i c h c a n b e
searched.
There are too many addresses which were in agree-
ment with reference conditions.
Please increase the number of reference characters
and perform re-reference.
sec06.fm 1 ページ ２００４年１２月８日 水曜日 午前１０時２４分
