background image

106

If you have problems

Resetting the gigabeat®

Resetting the gigabeat

®

If the above actions do not resolve the problem, try resetting the 
gigabeat

®

To reset the gigabeat

®

, press the reset switch located on the left of 

the unit using a ballpoint pen or paperclip.

 

(Sample Illustration) Resetting the gigabeat

®

No sound.

The earbuds are 
not connected 
properly.

Check the 
connection 
between the 
earbuds and 
gigabeat

®

.

See 

“Listening to 

music ” on page 35.

The volume is set 
to the minimum 
level.

Carefully, adjust 
the volume. 

See 

“Adjusting the 

volume ” on page 42.

The “charging” 
screen does not 
appear even when 
the gigabeat

®

 is 

charged.

The gigabeat

®

 is 

not connected 
properly. 

Check the 
connection 
between the USB 
cable and 
gigabeat

®

.

See 

“Charging the 

built-in 
battery/Connecting 
your computer and 
the gigabeat®” on 
page 16.

The ambient 
temperature is 
outside the 
specified range.

Charge the 
gigabeat

®

 at an 

ambient 
temperature 
within the 
specified range.

See 

“Charging the 

built-in 
battery/Connecting 
your computer and 
the gigabeat®” on 
page 16.

Your computer does 
not recognize the 
gigabeat

®

.

The gigabeat

®

 is 

not connected to 
your computer 
properly.

Check the 
connection 
between your 
computer and 
gigabeat

®

.

See 

“Charging the 

built-in 
battery/Connecting 
your computer and 
the gigabeat®” on 
page 16.

Summary of Contents for gigabeat T Series











































































































































Reviews: