16
Getting Started with Your gigabeat®
Charging the built-in battery/Connecting your computer and the
❖
So that your gigabeat
®
can communicate with your computer
properly, be sure to install Windows Media
®
Player 11 or 10
on your computer before connecting the gigabeat
®
to your
computer.
❖
It is recommended that you run Windows
®
Updates on your
computer after installing the software, to check for new module
updates.
1
Insert the CD-ROM that came with your gigabeat
®
into your
computer.
The CD-ROM will be automatically recognized and the
installation menu for application software will appear. If this
menu is not displayed, double-click Launcher.exe on the CD-
ROM using Explorer.
2
Click the Install Windows Media Player 10/11 button.
3
Follow the on-screen instructions.
Depending on the OS of your computer, Windows Media
®
Player 11 or Windows Media
®
Player 10 will be installed. (If
your computer is installed with Windows
®
XP Service Pack 2
or later, or Media Center Edition 2005 Rollup 2 or later,
Windows Media
®
Player 11 will be installed. If your
Windows
®
XP Service Pack or Media Center is an earlier
version, Windows Media
®
Player 10 will be installed.)
To close the installation menu, click the Close button.
Charging the built-in battery/Connecting your computer and
the gigabeat
®
To charge the battery, connect your gigabeat
®
to the computer with
the USB cable. Also use the USB cable to transfer audio files or
other media files to gigabeat
®
from a computer.
Charge the built-in battery sufficiently before using your gigabeat
®
for the first time, or when the gigabeat
®
is used after a long period
of non-operation.
Charging times vary depending on factors such as status of the
internal battery, ambient temperature, and performance of your
computer’s USB bus power supply.
Be sure to install Windows Media
®
Player 11 or 10 on your
computer first, or your gigabeat
®
will not be able to communicate
with your computer properly.
NOTE
NOTE