20
Getting Started with Your gigabeat®
Charging the built-in battery/Connecting your computer and the
Removing the gigabeat
®
from your computer
After the dots have stopped circling and while the message
“Connected” is shown on the screen
,
unplug the USB cable from
the gigabeat
®
.
While data is being transmitted between your computer and the
gigabeat
®
, “Updating” and other messages are shown on the
gigabeat
®
screen. Do not unplug or plug the USB cable while the
screen indicates that processing is still in progress (see the image
below). Unplugging/plugging the USB cable in this condition may
damage the data stored in your gigabeat
®
.
The screen may also display “Initializing” or "Finishing.”
(Sample Image) Updating screen