21
Getting Started with Your gigabeat®
Turning ON/OFF the power
Turning ON/OFF the power
1
Turn ON the gigabeat
®
power, by sliding the power switch to
the ON/OFF (
) position and releasing the switch.
To turn off the power, slide the power switch to the
ON/OFF (
) position again and releasing the switch.
(Sample Illustration) Turning the power ON or OFF
❖
You can also turn on the gigabeat
®
by plugging the earbuds
into the earbud jack. However, if the gigabeat
®
is locked
(LOCK switch is slid toward
), it will not turn on. The
gigabeat
®
does not automatically turn off when you disconnect
the earbuds.
❖
The backlight of the screen will turn off if the gigabeat
®
has not
been operated for a specified time, except when video data is
playing, photo data is being displayed in a slide show, or a
USB connection is active. Otherwise, if the gigabeat
®
has not
been operated for a specified time, the power will turn OFF
approximately 10 minutes after the last operation. Although
the backlight is turned off, the power does not turn off
automatically while music is playing.
See Also:
“Setting the backlight off time
❖
If any button on the gigabeat
®
is pressed while the backlight of
the screen is turned off, the screen will turn on and the
gigabeat
®
will accept the applicable operation command.
NOTE