manualshive.com logo in svg

Toshiba GN-1041, Operator'S Manual

The Toshiba GN-1041 Operator's Manual is an essential companion for maximizing the functionality of your device. It provides easy-to-follow instructions and guidelines to optimize your user experience. Download this comprehensive manual for free at 88.208.23.73:8080 and unlock the full potential of your Toshiba GN-1041.

Share
Download
background image

GN-1041 Operator’s Manual — PRECAUTIONS

5

USA-Federal Communications Commission (FCC)

This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions : (1) this device may not cause harmful interference, and (2) this 
device must accept any interference received, including interference that may cause 
undesired operation.
This equipment complies with part 15 of the FCC rules. Any changes or modifications 
not expressly approved by the manufacturer could void the user's authority to operate 
the equipment.
CAUTION: To comply with FCC RF exposure compliance requirements, a separation 
distance of at least 20 cm must be maintained between this device and all persons.

Bij deze verklaart TOSHIBA TEC dat deze GN-1041 voldoet aan de essentiële eisen en aan de 
overige relevante bepalingen van Richtlijn 1999/5/EC.

Par la présente TOSHIBA TEC déclare que l'appareil GN-1041 est conforme aux exigences 
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE

Par la présente, TOSHIBA TEC déclare que ce GN-1041 est conforme aux exigences essen-
tielles et aux autres dispositions de la directive 1999/5/CE qui lui sont applicables

Härmed intygar TOSHIBA TEC att denna GN-1041 står I överensstämmelse med de väsentliga 
egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Undertegnede TOSHIBA TEC erklarer herved, at følgende udstyr GN-1041 overholder de 
væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF

Hiermit erklärt TOSHIBA TEC, dass sich dieser/diese/dieses GN-1041 in Übereinstimmung mit 
den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 
1999/5/EG befindet". (BMWi)

Hiermit erklärt TOSHIBA TEC die Übereinstimmung des Gerätes GN-1041 mit den grundleg-
enden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. 
(Wien)

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ

 TOSHIBA TEC 

∆ΗΛΩΝΕΙ ΟΤΙ

 GN-1041 

ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ 

ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 

1999/5/EK

Con la presente TOSHIBA TEC dichiara che questo GN-1041 è conforme ai requisiti essenziali 
ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Por medio de la presente TOSHIBA TEC declara que el GN-1041 cumple con los requisitos 
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE

TOSHIBA TEC declara que este GN-1041 está conforme com os requisitos essenciais e outras 
disposicões da Directiva 1999/5/CE.

Thoshiba TEC Corpration timto prohlasuje, ze GN-1041 je ve shode se zakladnimi pozadavky a 
s dalsimi prislusnymi ustanoveni Narizeni vlady c. 426/2000 Sb.

Toshiba TEC Corporation declarã prin prezenta cã adaptorul fãrã fir LAN model GN-1041 este în 
conformitate cu cerinþele esenþiale ºi cu alte prevederi corespunzãtoare ale Directivei 1999/5/
EC

Ƭ

 Toshiba TEC Corporation

įdžNJǙnjİLj

µ

İ IJǎ ȺĮǏǗnj ǗIJLj IJǎ

µ

ǎnjIJƿNJǎ

GN-104

1

ĮıǘǏ

µ

ĮIJǎǑ ȺǏǎıĮǏ

µ

ǎDŽƿĮ

 LAN 

ıǑ

µµ

ǎǏijǙnjİIJĮLj

 µ

İ IJLjǐ ǃĮıLjljƿǐ ĮȺĮLjIJǀıİLjǐ ljĮLj IJLjǐ

NJǎLjȺƿǐ ıǒİIJLjljƿǐ įLjĮIJƾǍİLjǐ IJdžǐ ƳįdžDŽǁĮǐ

 1999/5/E

Ʈ

Toshiba TEC Corporation, GN-104

1

 model Kablosuz LAN Adaptörünün 1999/5/EC 

Tüzü

÷

ünün temel gereksinimlerine ve di

÷

er ilgili uygulamalara uydu

÷

unu beyan eder.

Summary of Contents for GN-1041

























































Reviews:

No comments

Related manuals for GN-1041

Canon BJC-S530D Quick Start Manual preview
BJC-S530D
Brand: Canon Pages: 96
Canon BJC-S500 Setup Instructions preview
BJC-S500
Brand: Canon Pages: 2
Canon BJC-S300 Setup Instructions preview
BJC-S300
Brand: Canon Pages: 2
Canon BJC-80 Specification preview
BJC-80
Brand: Canon Pages: 2
Canon BJC-6000 Series Setup Instructions preview
BJC-6000 Series
Brand: Canon Pages: 10
Canon BJC-55 Series Specification preview
BJC-55 Series
Brand: Canon Pages: 2
Canon BJC-5100 Series Technical Information preview
BJC-5100 Series
Brand: Canon Pages: 2
Canon BJC-50 Parts Catalog preview
BJC-50
Brand: Canon Pages: 4
Canon BJC-4400 Series Quick Start Manual preview
BJC-4400 Series
Brand: Canon Pages: 15
Canon BJC-3000 Series Quick Start Manual preview
BJC-3000 Series
Brand: Canon Pages: 8
Canon BJC-3000 Series Technical Information preview
BJC-3000 Series
Brand: Canon Pages: 2
Canon BJC-2100 Series Quick Start Manual preview
BJC-2100 Series
Brand: Canon Pages: 9
Canon BJC S600 Setup Instructions preview
BJC S600
Brand: Canon Pages: 11
Canon BJC-2100 Series Simplified Manual preview
BJC-2100 Series
Brand: Canon Pages: 9
Canon BJC-55 Series Service Manual preview
BJC-55 Series
Brand: Canon Pages: 206
Canon 900D - i Color Inkjet Printer Printing Manual preview
900D - i Color Inkjet Printer
Brand: Canon Pages: 30
Canon 8996A001 - i 455 Color Inkjet Printer Printing Manual preview
8996A001 - i 455 Color Inkjet Printer
Brand: Canon Pages: 4
Canon 820D - S Color Inkjet Printer Application Manual preview
820D - S Color Inkjet Printer
Brand: Canon Pages: 140

Brands by name

Popular brands

Load more brands