19
4. Maintenance and care of the appliance
4.1 Overall cleaning
t
Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the
cooling effect andenergy saving.
t
Check the door gasket regularly to make sure there are no debris. Clean the door gasket with
a soft cloth dampened with soapy water or diluted detergent.
t
The interior of the refrigerator should be cleaned regularly to avoid odor.
t
Please turn off the power before cleaning interior, remove
all foods, drinks ,shelves, drawers, etc.
t
Use a soft cloth or sponge to clean the inside of the
refrigerator, with two tablespoons of baking soda and
a quart of warm water. Then rinse with water and wipe
clean. After cleaning, open the door and let it dry naturally
before turning on the power.
t
For areas that are difficult to clean in the refrigerator (such
as narrow sandwiches, gaps or corners), it is recommended
to wipe them regularly with a soft rag, soft brush, etc.
and when necessary, combined with some auxiliary tools (such as thin sticks) to ensure no
contaminants or bacterials accumulation in these areas.
t
Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in
the interior of the refrigerator or contaminated food.
t
Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy water or
diluted detergent. Dry with a soft cloth or dry naturally.
t
Wipe the outer surface of the refrigerator with a soft cloth dampened with soapy water,
detergent, etc., and then wipe dry.
t
Do not use hard brushes, clean steel balls, wire brushes, abrasives (such as toothpastes),
organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline
items, which may damage the fridge surface and interior. Boiling water and organic solvents
such as benzene may deform or damage plastic parts.
t
Do not rinse directly with water or other liquids during cleaning to avoid short circuits or
affect electrical insulation after immersion.
4.2 Cleaning of the track storage box
Cleaning steps:
a. horizontally pull out track storage box of refrigerating chamber in a daily using manner to the
direction and location of Figure 2;
b. as shown in Figure 2: press track buckle under the storage box to smoothly pull out storage
box;
c. after cleaning of storage box, install it according to the way of pull-out;
Please unplug the refrigerator for defrost and cleaning.
Summary of Contents for GR-RF646WE-PML(06)
