77
ICC
b) The “Add Ladder Element” window appears.
c) Select the “XIO” element in the Bit folder. Refer to Figure 75.
d) Click
OK.
Figure 75: Adding an XIO Element
4) Configure the MSG instruction.
a) Edit the “Message Control” field on the MSG instruction to use the
previously-created “connection” tag. Refer to Figure 76.
Figure 76: MSG Instruction Tag Assignment
b) Click the message configuration button (“…”) in the MSG instruction.
The “Message Configuration” window will open. Refer to Figure 77.
c) “Configuration” tab settings:
i)
Change the “Message Type” to “CIP Data Table Read”.
ii)
In the "Source Element” field, enter the read tag you wish to
access (refer to section 13.2.5.) In this example, we will be
