26
Items to be checked
Symptom
No picture
䍃
Is power supplied correctly?
䍃
Is the lens iris adjusted correctly?
䍃
Are the camera and video cables connected correctly?
䍃
Is the shutter mode set correctly?
䍃
Is the monitor on, and in working condition?
䍃
Can the monitor (that you are using) accept the HD-SDI signal coming out of the
camera?
Poor color
䍃
Is the monitor adjusted correctly?
䍃
Is the white balance of the camera adjusted correctly?
(in modes other than automatic tracking)
䍃
Is the matrix color correction set correctly?
䍃
Is the illumination sufficient?
8. BEFORE MAKING SERVICE CALL
Power supply
12V DC
㫧
10%
Power consumption
Approx. 3.5 W
Image sensor
1/3 inch color CMOS sensor (Rolling shutter)
Output pixels
Horizontal : 1920, Vertical : 1080 (max)
Scanning system
Progressive
Signal system
1080/59.94i, 1080/50i, 720/59.94p, 720/50p
Scan frequency
Horizontal : 33.716 kHz, Vertical : 59.94 Hz (1080/59.94i setting)
Horizontal : 28.125 kHz, Vertical : 50 Hz (1080/50i setting)
Horizontal : 44.955 kHz, Vertical : 59.94 Hz (720/59.94p setting)
Horizontal : 37.500 kHz, Vertical : 50 Hz (720/50p setting)
Sync system
Internal
Sensitivity
F 4 standard (2000 lx, 3000K)
Minimum illumination
8 lx standard (50 IRE, F1.4, gain
㧗
18 dB,
gamma setting ON (setting value 0), 3000 K)
Lens mount
C mount
Operating temperature
(32
㫦
㫦
F)
to 40
0
F to 104
㷄
㷄
Operating humidity
Less than 90% (non condensing)
Weight
Approx. 150 g (0.33 lbs)
External dimension
44(W) × 44(H) × 78(D) mm (1.73”(W)
㬍㩷
1.73”(H)
㬍㩷
3.07”(D) ) (excluding protrusions)
Scene file
A, B, C, D, E
White balance
ATW
䋨
Automatic tracing white balance
䋩
, AWB
䋨
Automatic white balance
䋩
,
MANUAL
䋨
Manual
䋩
Gain
MANUAL (Manual), OFF (0 dB)
Output signal
HD-SDI (SMPTE292M), 0.8 V (p-p) standard
75 ohms unbalanced BNC connector
Remote control
Serial data interface (RS-232C)
Design and specifications are subject to change without notice.
9. SPECIFICATIONS
IK-HR1S̲EN.indd 26
IK-HR1S̲EN.indd 26
2008/12/01 17:35:29
2008/12/01 17:35:29
