71
Viewing
・
Listening
and Operation
Introduction
Set up
Recording
Others
● Adding Multiple Cameras
The network camera has a feature to automatically detect other cameras
on the same network. If you want to display images from network cameras,
which are on other networks, in multi-view mode, register them on the "Multi-
Screen Mode Settings" "Adding and Removing Cameras" screen.
1）
In the left side of the window, click the toggle (＋)
of "Multi-Screen Mode Settings"
・The sub menus appear.
2）From the list of sub menus, click "Adding and
Removing Cameras"
・The settings appear in the right side of the window.
3）Enter a domain name or an IP address
4）Enter the HTTP port number
5）Click the
save
button
・The settings are registered in the network cameras.
NOTE
●
Clicking the
reset
button instead of clicking
save
button at Step 5)
restores the previous configuration.
●
You can use any of the following procedures to confirm whether the network
camera of an entered IP address has been registered.
・In the left side of the window, click "Multi-Screen Mode Settings".
・From the list of sub menus of "Multi-Screen Mode Settings", click
"Selection of Cameras".
