GENERAL SYSTEM CONFIGURATION
Powering on the Handset
1-12
IP4100 Install Sept., 2013
GENERAL SYSTEM
CONFIGURATION
Important!
This document does not cover general IP and SIP
network setup. If you need more information on the
necessary settings for your servers, contact your network
administrator.
Change Configuration and Management Settings
1.
In the left panel of the screen, select
Management
. This opens the
Management screen.
2.
In the Base Station Name field, enter the title you want to appear in
the configuration screens for this base station. (This will help you
verify that you have logged into the correct base station in the future.)
The title can be any HTML-readable text string.
3.
In the Configuration server address field, enter the IP address or URL
of the server that hosts SIP log files (this is usually your TFTP server).
The base station will also copy its debug files to this sever. The TFTP
Server must be running for SIP log file uploads.
4.
Under Management Transfer Protocol, select TFTP.
5.
HTTP management is reserved for system development; just ignore
these fields.
6.
If you want to have this base station copy SIP messages onto the
configuration server, select Enabled in the Upload of SIP Log field.
SIP logs are named in the format of
{MAC_address}_SIP_{timestamp}.log (Unless you are
troubleshooting a specific problem, you should leave this
Disabled
.)
7.
Trace server information is reserved for system development; just
ignore these fields.
8.
To have this base station copy system log messages onto a system
log server, enter the IP address of the server in the Syslog Server IP
Address field. (If your syslog server is listening to a port other than the
default, enter that port number in System Syslog Port.) Then, in the
Syslog Level field, select one of the following:
•
Off
: no system events are logged.
•
Normal Operation
: This will output normal operation event
logs targeted for an administrative audience. Event logs
