BASE STATION CONFIGURATION
Add Extension and Edit Extension
IP4100 Install Sept., 2013
3-7
Outbound Proxy
Enter the IP address and port of the Session Border Controller DNS or
the IPedge or Strata CIX system outbound proxy address. Use one of
these formats:
•
IP address (e.g., 192.168.0.1)
•
{IPaddress}:{port} (e.g., 192.168.0.1:5060)
•
Domain name (e.g., nat.company.com)
•
{SIP address}:{port} (e.g., sip:nat@company.com:5065)
Re-registration time
Enter the number of seconds that will determine the frequency of
handset re-registrations with the IPedge or Strata CIX system. Set the
Re-registration to
60
.
Keep Alive
•
If you want the base to send Keep Alive messages, select
Enable
.
They will be sent according to the frequency specified on the
Network Settings screen.
•
If you do not want the base to send Keep Alive messages, select
Disable
.
DTMF Signalling
Set the type of DTMF signalling to: RFC 2833: DTMF tones are sent via
data packets in a different Internet layer from the voice stream.
Codec Priority
Set the priority to G711U. Click on any other codec that appears on the
list then
Remove
to remove the codec from the list. To restore the
codec list to its original values and order, click
Reset
.
Table 3-7
Servers Parameters
(continued)
Parameter
Description
(Sheet 2 of 2)
