Toshiba IPedge User Manual Download

Page: 136 / 322

IPedge UG 01/13

TOSHIBA

132

Changing Agent

Status

1. Click the ACD Status button. The following ACD Agent Status window will

appear:

To Make Agent Unavailable

1. Use pull-down list and choose a reason.

2. Click the Make Unavailable button.

3. Click Done.

To Make Agent Available

1. Click the Make Available button.

2. Click Done.

To Set the ACD Status to Wrap-up

1. Click Set Wrap-up button.

2. Click Done.

Note:

The Set Wrap-up button is NOT available on all installations.

To End Wrap-up

1. Click the ACD Status button.

2. Click the End Wrap-up button.

3. Click Done.

Summary of Contents for IPedge



































































































































































































































































































































Search results

Summary of Contents for IPedge

Reviews:

Related manuals for IPedge

Brands by name

Popular brands

Toshiba IPedge, User Manual

Search results

Summary of Contents for IPedge

Reviews:

Related manuals for IPedge

Brands by name

Popular brands