background image

55

Getting Started

Adding memory (optional)

5.375 x 8.375 ver 2.3

For more information on memory options, check the 
accessories information that came with your computer, or 
visit

accessories.toshiba.com

.

Before adding external devices or memory, Toshiba 
recommends setting up your software. See 

“Setting up your 

software” on page 45

.

Installing a memory module

Additional memory modules can be installed in the memory 
module slots on the base of the computer. You will need a 
standard Phillips No. 1 screwdriver for this procedure.

If you use the computer for a long time, the memory module 
will become hot. If this happens, let the module cool to room 
temperature before you replace it.

To avoid damaging the computer’s screws, use a standard 
Phillips No. 1 screwdriver that is in good condition. 

Installing a memory module with the computer’s power on may 
damage the computer, the module, or both.

NOTE

Summary of Contents for L20/L25

































































































































































































































































Reviews: