59
Getting Started
Adding memory (optional)
5.375 x 8.375 ver 2.3
Sample aligning the module into the socket
13
Gently press down on the memory module connector
until the clips snap into place.
Sample pressing down on the memory module connector until
the clips snap into place
Do not force the memory module into position. The
memory module should be completely inserted into the
socket and level when secured in place.
The clips on either side of the memory module snap into
place when the memory module is properly inserted.
14
Replace the memory module slot cover and tighten the
screws.
15
Re-insert the battery. For more information on inserting
the battery, see
“Changing the main battery” on page 118
16
Turn the computer right side up.
clip
clip
