background image

User’s Manual

3-13

Hardware, Utilities and Options

4. Grasp the media and remove it.

Figure 3-3 Removing memory media

Optional accessories

You are able to add a number of options and accessories in order to make 

your computer even more powerful and convenient to use. For reference, 

the following list details some of the items that are available from your 

reseller or TOSHIBA dealer:

1. MicroSD card slot

2. Memory media

2

1

Do not remove the memory media or turn off the computer’s power 

while the computer is accessing the memory media, otherwise, you 

may lose data or damage the media.

Do not remove the memory media while the computer is in Sleep or 

Hibernation Mode. The computer could become unstable or data in the 

memory media could be lost.

Universal AC 

Adaptor

If you frequently use your computer at more than 

one site, it may be convenient to purchase an 

additional AC adaptor to be kept at each site in 

order to remove the need to always carry the 

adaptor with you.

Battery Pack

An additional battery pack can be purchased for 

use as either a spare or replacement. Please 

refer to Chapter 5, 

Power and Power-Up Modes

 

for further information.

Summary of Contents for Libretto W100
























































































































Reviews: