– 16 –
Lite-Vision plus Remote Controller
Installation Manual
EN
6. Header/follower
Set the remote controller as “Header remote controller” or “Follower remote controller”when the dual remote
controller system is used.
Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting the
setting operation.)
Note for the Header/follower setting
• Set the RBC-AMS51E-ES and RBC-AMS51E-EN remote controller as the Header remote controller when the
dual remote controller system is used.
• The RBC-AMS51E-ES and RBC-AMS51E-EN remote controller can be used as the Follower remote controller
when the dual remote controller system is used that consists of two RBC-AMS51E-ES, RBC-AMS51E-EN
remote controllers.
• The following functions are not available when the remote controller is set as the Follower remote controller:
Schedule timer / Off reminder timer / Night operation / Save operation / Return back
NOTE
• Some functions are not available when the remote controller is set as the Follower remote controller.
• In the dual remote controller system, the latter operation overrides the former.
• The remote controller is set as “Header remote controller” as factory default.
1
Push the [
∧
] / [
∨
] button to select
“6. Header/follower” on the “Initial setting”
screen, then push the “
Set” [
F2] button.
2
Push the [
∧
] / [
∨
] button to select
the setting.
3
Push the [
MENU] button.
Æ
“Setting” appears on the screen, then the
screen returns to the “Initial setting” screen.
Initial setting(2/2)
6.Header/Follower
7.Language
8.Press & hold 4 sec.
Set
Return
Set
Header/Follower
Header
remote controller
Follower
remote controller
Return
Fix
Header remote
controller
Follower
remote
controller
Indoor unit
Outdoor unit
+00EH97062701_00EN.book Page 16 Thursday, March 17, 2011 5:29 PM
