System Configuration Setup
Onboard SCSI Utility
114
❖
Exit Saving Changes
Saves changes and restarts the system. Performs the same function as pressing the
F10 key.
❖
Exit Discarding Changes
Discards all recent configuration changes, then restarts the server. When you select
this item, the system displays the confirmation request message “Configuration has
not been saved! Save before exiting?” Respond with
No
if you want to save any
changes before rebooting the system.
❖
Load Setup Defaults
Resets all setup options to their default values, except for passwords. Performs the
same function as pressing the F9 key.
❖
Discard Changes
Reverts to the settings that existed when the BIOS Setup Utility started. (Except
passwords)
❖
Save Changes
Saves changes.
Onboard SCSI Utility
The onboard SCSI Utility is set prior to shipping. Use the Utility when mounting a built-in
type of SCSI device in the device bay or confirming the settings.
Starting the SCSI Utility
When the server is turned on or restarted, the monitor displays the onboard SCSI BIOS
initialize message shown below. The display differs according to the type of connected
SCSI device.
When the settings are correct, the SCSI ID and device name of the SCSI device
connected to the onboard SCSI controller appear on the screen. To start the SCSI Utility,
press the Ctrl (control) and <A> keys simultaneously after the monitor has displayed the
message “Press Ctrl-A to start SCSISelect Utility...”.
Adaptec SCSI BIOS v.X.XX
(C) XXXX Adaptec, Inc. All Rights Reserved
Press Ctrl-A for SCSISelect (TM) Utility!
Summary of Contents for Magnia 3310
Page 1: ......