Hardware Diagnostics
HW Diagnostics Program Main Menu
258
Running Test (02. RUNNING TEST)
1
Using the arrow keys, highlight
02. RUNNING TEST
on the HW Diagnostics
Program Main Menu.
2
Press
Enter
.
When a test is selected, the TEST PARAMETER Screen appears:
TEST PARAMETER Screen for 02. RUNNING TEST
Select one of the following, using the arrow keys:
❖
01. Go to Test
Select this option to start the RUNNING TEST.
When the test is completed, the test result appears on the screen in large text.
If you need to stop the test program, press
<Ctrl> + <Break>
.
❖
02. Test ITEM EDIT
Select this option to see the items currently in the RUNNING TEST and to add or delete
individual tests. See description below.
❖
03. Finish BUZZER Sound
Select this option so that when the Server finishes the running test, the beep sounds.
❖
99. Exit to DIAGNOSTIC MENU
No error has been detected.
OK
The test has been compulsorily ended or any error has been
detected.
FAILED
To check the error log, select
03.LOG UTILITIES
on the HW Diagnostics Program
Main Menu. For the key operation on the error log display, refer to “Checking error
log” in this chapter. If the test in progress has been stopped, the test result is not
displayed.
[ TEST PARAMETER ]
01.
Go to Test
02.
Test ITEM EDIT
03.
Finish BUZZER Sound : OFF
04.
Exit to DIAGNOSTIC MENU
Summary of Contents for Magnia 3310
Page 1: ......
