Connecting Hardware Devices
CPU module
80
3
Align the CPU pins correctly with the holes in the socket, and, with extreme caution,
allow the CPU to fall into the socket. Press in the CPU module until both ends are
even and flat. It should not require much, if any, manual assistance.
Inserting the CPU module
4
Push down the socket lock lever until it hooks on the socket claw and is locked in
place.
Pushing down the CPU lock lever
5
For both CPU1 and CPU2, latch both ends of the claws of the heat sink in the left
and right retention clamp holes on the power supply side of the CPU(s).
A standard CPU module is installed in CPU socket 1. To add a secondary
CPU module, install it in CPU socket 2.
Summary of Contents for Magnia 3310
Page 1: ......
