background image

– 3 –

1

Precautions for safety

The manufacturer shall not assume any liability for the damage caused by not observing the description of this 
manual.

WARNING

General

• Carefully read Owner’s Manual before starting the air conditioner. There are many important things to keep in mind for daily 

operation.

• Ask for installation to be performed by the dealer or a professional. Only a qualified installer (*1) is able to install an air 

conditioner. If a non-qualified person installs an air conditioner, it may result in problems such as fire, electric shock, injury, 
water leakage, noise and vibration. 

• Do not use any refrigerant different from the one specified for complement or replacement.

Otherwise, abnormally high pressure may be generated in the refrigeration cycle, which may result in a failure or explosion 
of the product or an injury to your body.

• Places where the operation sound of the outdoor unit may cause a disturbance. (Especially at the boundary line with a 

neighbor, install the air conditioner while considering the noise.)

Transportation and storage

• When transporting the air conditioner, wear shoes with protective toe caps, protective gloves, and other protective clothing.
• When transporting the air conditioner, do not take hold of the bands around the packing carton. You may injure yourself if 

the bands should break.

• When stacking the packing cartons for storage or transportation, heed the precautions written on the packing cartons. 

Failure to heed the precautions may cause the stack to collapse.

• You shall ensure that the air conditioner is transported in stable condition. If you find any part of the product broken, contact 

your dealer.

Installation

• Only a qualified installer(*1) or qualified service person(*1) is allowed to carry out the electrical work of the air conditioner. 

Under no circumstances must this work be done by an unqualified individual since failure to carry out the work properly may 
result in electric shocks and/or electrical leaks.

• After the installation work has been completed, have the installer explain about the circuit breaker positions. In the event 

that error has occurred in the air conditioner, set the circuit breaker to the OFF position, and contact a service person.

• If you install the unit in a small room, take appropriate measures to prevent the refrigerant from exceeding the limit 

concentration even if it leaks. Consult the dealer from whom you purchased the air conditioner when you implement the 
measures. Accumulation of highly concentrated refrigerant may cause an oxygen deficiency accident.

• Do not install the air conditioner in a location that may be subject to a risk of expire to a combustible gas. If a combustible 

gas leaks and becomes concentrated around the unit, a fire may occur.

• Be sure to use the company-specified products for the separately purchased parts. Use of non-specified products may 

result in fire, electric shock, water leakage, etc. Have the installation performed by a professional.

• Confirm that earthing is performed correctly. 

Operation

• Before opening the intake grille of the indoor unit or service panel of the outdoor unit, set the circuit breaker to the 

OFF position. Failure to set the circuit breaker to the OFF position may result in electric shocks through contact with 
the interior parts. Only a qualified installer(*1) or qualified service person(*1) is allowed to remove the intake grille of 
the indoor unit or service panel of the outdoor unit and do the work required.

• Inside the air conditioner are high-voltage areas and rotating parts. Due to the danger of electric shocks or of your 

fingers or physical objects becoming trapped in the rotating parts, do not remove the intake grille of the indoor unit or 
service panel of the outdoor unit. When work involving the removal of these parts is required, contact a qualified 
installer or a qualified service person.

• Do not move or repair any unit by yourself. Since there is high voltage inside the unit, you may get electric shock 

when removing the cover and main unit.

• Use of a stand more than 50 cm high to clean the filter of the indoor unit or to carry out other such jobs constitutes 

working at heights. Due to the danger of falling off the stand and injuring yourself while working at heights, this kind 
of work should not be done by unqualified individuals. When this kind of work must be carried out, do not do it yourself 
but ask a qualified installer or a qualified service person to do it for you.

• Do not touch the aluminum fin of the outdoor unit. You may injure yourself if you do so. If the fin must be touched, do 

not touch it yourself but contact a qualified installer or a qualified service person.

• Do not climb onto or place objects on top of the outdoor unit. You may fall or the objects may fall off of the outdoor 

unit and result in injury.

• Do not place any combustion appliance in a place where it is directly exposed to the wind of air conditioner, otherwise 

it may cause imperfect combustion.

• When the air conditioner is operated with a combustion appliance in the same place, be careful of ventilation to let 

fresh air enter the room. Poor ventilation causes oxygen shortage.

• When the air conditioner is used in a closed room, be careful of sufficient ventilation of the room. Poor ventilation 

causes oxygen shortage.

• Do not expose your body to cool air directly for a long time and do not cool yourself excessively.

Doing so may result in deteriorated physical condition and ill health.

• Never insert your finger or a stick into the air intake or discharge.

Doing so may result injury as the fan is rotating at high speed inside the unit. 

• Consult the shop where you purchased the air conditioner if air conditioning (cooling and heating) is not performed 

properly as a refrigerant leakage may be the cause. Confirm the repair details with a qualified service person(*1) 
when the repair includes additional charging of the refrigerant. 

• Be sure to stop running the air conditioner and turn off the breaker before cleaning.

Otherwise, injury may result as the fan is rotating at high speed inside the unit.

Repairs

• When you have noticed that some kind of error (such as when an error display has appeared, there is a smell of burning, 

abnormal sounds are heard, the air conditioner fails to cool or heat or water is leaking) has occurred in the air conditioner, 
do not touch the air conditioner yourself but set the circuit breaker to the OFF position, and contact a qualified service 
person. Take steps to ensure that the power will not be turned on (by marking “out of service” near the circuit breaker, for 
instance) until qualified service person arrives. Continuing to use the air conditioner in the error status may cause 
mechanical problems to escalate or result in electric shocks, etc.

• If you have discovered that the fan grille is damaged, do not approach the outdoor unit but set the circuit breaker to the OFF 

position, and contact a qualified service person to have the repairs done. Do not set the circuit breaker to the ON position 
until the repairs are completed.

• If you have discovered that there is a danger of the indoor unit’s falling, do not approach the indoor unit but set the circuit 

breaker to the OFF position, and contact a qualified installer or a qualified service person to refit the unit. Do not set the 
circuit breaker to the ON position until the unit has been refitted.

• If you have discovered that there is a danger of the outdoor unit’s toppling over, do not approach the outdoor unit but set 

the circuit breaker to the OFF position, and contact a qualified installer or a qualified service person to have the 
improvements or refitting done. Do not set the circuit breaker to the ON position until the improvements or refitting is 
completed.

• Do not customize the unit. Doing so may result in fire, electric shock, etc.

Relocation

• When the air conditioner is to be relocated, do not relocate it yourself but contact a qualified installer or a qualified service 

person. Failure to relocate the air conditioner properly may result in electric shocks and/or a fire.

CAUTION

To disconnect the appliance form the main supply

• This appliance must be connected to the mains by means of a switch with a contact separation of at least 

3 mm

.

Installation fuse (all types can be used) must be used for the power supply line of this air conditioner.

Installation

• Certainly lay the drain hose for perfect draining. Bad drainage may cause flooding in the house and getting 

furniture wet.

• Make sure to connect the air conditioner to an exclusive power supply of the rated voltage, otherwise the unit 

may break down or cause a fire.

• Confirm that the outdoor unit are fixed on the base. Otherwise, falling down of the units or other accidents may 

occur.

Operation

• Do not use this air conditioner for special purpose such as preserving food, precision instruments, art objects, 

breeding animals, car, vessel, etc.

• Do not touch any switches with wet finger, otherwise you may get an electric shock.
• If the air conditioner will not be used for a considerably long time, turn off the main switch or the circuit breaker, 

for safety.

• To make the air conditioner operate in its original performance, operate it within the range of the operating 

temperature specified in the instructions. Otherwise it may cause a malfunction, or water leak from the unit.

• Prevent any liquid from falling into the remote controller. Do not spill juice, water or any kind of liquid.
• Do not wash the air conditioner. Doing so may result in electric shock.

5-EN

6-EN

Summary of Contents for MAP1404FT8-E
























Reviews: