TOSHIBA MCU FLASH WRITER INSTRUCTION MANUAL
T.S ELECTRONICS
1. Package Contents
1) TOSHIBA FLASH WRITER
2) USB-to-USB CABLE
4) INSTRUCTION MANUAL
5) INSTALL CD-ROM
The TOSHIBA MCU FLASH WRITER contains the following items
●
TOSHIBA MCU FLASH WRITER
●
USB-to-USB CABLE
●
TOSHIBA FLASH WRITER INSTRUCTION MANUAL (Short Form)
●
INSTALL CD-ROM
●
On-Board CABLE
2. Software Setup
The following files are included on the CD-ROM
●
TOSHIBA Flash Programmer (sw00fn5-zccuvxxx_en.exe)
●
Driver installation utility (CP210x_ Drivers.exe)
●
TOSHIBA Flash Programmer Manual (Kor,Eng)
2-1. Install Windows Virtual COM Port Driver
To install the Windows Virtual COM Port Driver, run CP210x_Drivers.exe on the CD-ROM
COM Port properties for the device can be selected in the device manager
(COM Port Number, Baud Rate etc.)
USB CONNECTOR
RESET SWITCH
POWER SWITCH
YAMAICHI SOCKET
CONNECTOR
For On-Board Writing
Do not pull out the USB Cable when TOSHIBA Flash Programmer is running.
2. Make a connection between Flash Writer and PC with USB Cable.
3. Turn on Flash Writer and Execute
TOSHIBA Flash Programmer.
4. If you want to make a reconnection between two devices,
Click
RECONNECT Icon
on Flash Programmer and Push the
RESET SWITCH
on Flash Writer.
TOSHIBA FLASH WRITER
OFF-BOARD WRITING
ON-BOARD WRITING
Target Board
Do not pull out the USB Cable when TOSHIBA Flash Programmer is running.
2. Make a connection among Target Board and Flash Writer and PC with USB Cable.
3. Turn on Flash Writer and Execute
TOSHIBA Flash Programmer
.
4. If you want to make a reconnection among three devices,
Click
RECONNECT Icon
on Flash Programmer and Push the
RESET SWITCH
on Flash Writer.
1. Install
CP210x_Drivers.exe
included on the CD-ROM
1. Install
CP210x_Drivers.exe
included on the CD-ROM
TOSHIBA Flash Writer Simple Manual
TS ELECTRONICS CO., LTD.
2-2. Install TOSHIBA Flash Programmer
To install the TOSHIBA Flash Programmer, run sw00fn5-zccuvxxx_en.exe on the CD-ROM
If you want to know further information about the TOSHIBA Flash Programmer,
Please refer to the TOSHIBA Flash Programmer Manual on the CD-ROM
3) On-Board CABLE
●
TOSHIBA MCU FLASH WRITER Instruction Manual
