Set Key
Operations
Remocon
Key
Standard
Time
Set
Condition
C2-1
SERVICE MODE LIST
This unit is provided with the following SERVICE MODES so you can repair, examine and adjust easily.
To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit or on the main unit and on
the remote control for more than the standard time (second).
Releasing of PARENTAL LOCK.
Refer to the “PARENTAL CONTROL - RATING LEVEL”.
STOP (DVD)
7
2
4
2
Initialization of factory on DVD data.
NOTE: Do not use this for normal servicing.
VOL. (-) MIN
0
VOL. (-) MIN
6
VOL. (-) MIN
1
VOL. (-) MIN
9
Releasing of V-CHIP PASSWORD.
Display of the Adjustment MENU on the screen.
Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen Display
Adjustment).
Initialization of factory TV data.
NOTE: Do not use this for data normal servicing.
If you set factory initialization, the memories are reset such as
the clock setting, the channel setting, the POWER ON total
hours.
2
2
2
2
TV mode
TV mode
TV mode
ALL mode
DVD mode
(No disc)
DVD mode
(No disc)
VOL. (-) MIN
8
ALL mode
Check of the SUM DATA, POWER ON total hours, MICON
VERSION and DIGITAL TV MICON FIRMWARE on the screen.
Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".
2
Can be checked of the INITIAL DATA of MEMORY IC.
Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".
Method
Press the following remocon keys
continuously.
SETUP SUBTITLE 3
AUDIO SELECT 0
The disk cannot be taken out.
Refer to the “TRAY LOCK”.
Operations
5
2
DVD Write mode.
Refer to the “RE-WRITE FOR DVD FIRMWARE”.
DVD mode
(No disc)
VOL. (-) MIN
VOL. (-) MIN
