29
Operation
1
Press the jog switch 1 in and hold for
more than 1 second.
(To play an SD memory card, insert it
into the player.)
The player turns on and PlayLists appear in
the display.
Notes
• PlayLists do not appear if the player recognizes only one PlayList inside, or after
you have turned the player off without stopping play.
• After you have played once, the player automatically resumes the play you
stopped when turned on. However, the resuming is not possible after:
you removed the batteries./you ejected the SD memory card./you changed the
audio data in the SD memory card or the internal memory of the player./you
formatted the SD memory card or the internal memory of the player./ the player
turned on by power from the connected computer.
2
Push the jog switch 2 up and down to
select a PlayList.
If PlayLists do not appear, skip to step 3.
3
Press the jog switch 1 in.
Playback starts.
4
Adjusting the volume by pushing the
jog switch 2 up and down.
Push up (+) : to turn up.
Push down (–) : to turn down.
Note
The graphic display returns to normal mode a few seconds after adjusting the
volume.
Display
PlayList
PlayList
(continued)
Volume control
mode display
Volume meter
Playback procedure
1, 3
2, 4
–
+
–
+
