24
Getting Started
Disconnecting the gigabeat® from the computer
You cannot use the gigabeat
®
when “USB Connected” is displayed.
❖
Operation cannot be guaranteed if you are connected to the
computer via a USB hub.
❖
When using a third-party general-purpose USB AC adapter to
charge the gigabeat
®
, ensure that the supply voltage is 5V.
However, note that normal operation cannot be guaranteed.
❖
If a USB AC adapter is used to charge the gigabeat
®
, the
battery level display on the gigabeat
®
screen changes as
shown below.
(Sample Illustration) Battery level display on the gigabeat
®
screen
while charging
Disconnecting the gigabeat
®
from the computer
To disconnect the gigabeat
®
, unplug the USB cable from the
computer.
(Sample Illustration) Unplugging the USB cable from the computer
When the gigabeat
®
is connected to a computer, do not disconnect
the gigabeat
®
from the computer while “Do Not Disconnect” is
displayed on the gigabeat
®
screen. Only disconnect the gigabeat
®
when “USB Connected” is displayed. Disconnecting the gigabeat
®
when “USB Connected” is displayed may prevent normal startup. If
this happens, reconnect the gigabeat
®
to the computer and then
disconnect it again when “USB Connected” is displayed.
NOTE
NOTE
After connection
Charging
Charging complete
NOTE