Installation Manual
1111058602_EN.indd 5
11/26/16 4:07 PM
• Do not climb onto or place objects on top of the outdoor unit. You may fall or
the objects may fall off of the outdoor unit and result in injury.
• When work is performed at heights, use a ladder which complies with the
ISO 14122 standard, and follow the procedure in the ladder’s instructions.
Also wear a helmet for use in industry as protective gear to undertake the
work.
• Before cleaning the
¿
lter or other parts of the outdoor unit, set the circuit
breaker to OFF without fail, and place a “Work in progress” sign near the
circuit breaker before proceeding with the work.
• Before working at heights, put a sign in place so that no-one will approach
the work location, before proceeding with the work. Parts and other objects
may fall from above, possibly injuring a person below. While carrying out the
work, wear a helmet for protection from falling objects.
• The refrigerant used by this air conditioner is the R410A.
• The air conditioner must be transported in stable condition. If any part of the
product is broken, contact the dealer.
• When the air conditioner must be transported by hand, carry it by two or
more people.
• Do not move or repair any unit by yourself. There is high voltage inside the
unit. You may get electric shock while removing the cover and main unit.
• This appliance is intended to be used by expert or trained users in shops,
in light industry, or for commercial use by lay persons.
Selection of installation location
• When the air conditioner is installed in a small room, provide appropriate
measures to ensure that the concentration of refrigerant leakage occur in the
room does not exceed the critical level.
• Do not install the air conditioner in a location that may be subject to a risk
of exposure to a combustible gas. If a combustible gas leaks and becomes
concentrated around the unit, a
¿
re may occur.
• To transport the air conditioner, wear shoes with additional protective toe
caps.
• To transport the air conditioner, do not take hold of the bands around the
packing carton. You may injure yourself if the bands should break.
• Do not place any combustion appliance in a place where it is directly
exposed to the wind of air conditioner, otherwise it may cause imperfect
combustion.
• Do not install in a location where
À
ammable gas leaks are possible. If the
gas leak and accumulate around the unit, it may ignite and cause a
¿
re.
• Install the indoor unit at least 2.5 m above the
À
oor level since otherwise
the users may injure themselves or receive electric shocks if they poke
their
¿
ngers or other objects into the indoor unit while the air conditioner is
running.
Installation
• Install the air conditioner securely in a location where the base can sustain
the weight adequately. If the strength is not enough, the unit may fall down
resulting in injury.
• Follow the instructions in the Installation Manual to install the air conditioner.
Failure to follow these instructions may cause the product to fall down or
1111058602_EN.indd 6
11/26/16 4:07 PM
FILE NO. SVM-17045
- 73 -
