14
English-14
Setup of air direction and swinging
1
Push
SWING/FIX
button during operation.
• [SWING
] is displayed and the air direction
automatically changes upward/downward.
In case when one remote controller controls the
multiple indoor units, each indoor unit can be
selected and its air direction can be set up.
2
Push
SWING/FIX
button again during swinging of
the louver.
• The air outlet louver can be stopped at the
desired position.
3
UNIT LOUVER
• To set up the air direction individually, push
UNIT LOUVER
button to display each indoor unit No. in
a group control. Then set up the air direction to a
displayed indoor unit.
• If there is no display, all the indoor units can be
operated collectively.
• Every pushing
UNIT LOUVER
button, the display
exchanges as shown in the figure.
4-way Air Discharge Cassette Type
(2H series only )
How to set louver wind direction individually
1
Select an indoor unit to be set by pushing
UNIT LOUVER
(left side of the button) during operation.
• The indoor unit number changes each time you
push the button.
∗
When no unit number is displayed, all indoor units
are selected.
2
Select a louver you want to adjust change by
pushing
UNIT LOUVER
(right side of the button).
• Each time you push the button, the display on the
left of the remote controller changes as follows:
∗
When no louver number is displayed, all four
louvers are selected.
3
Determine wind direction of the selected
louver by pushing
SWING/FIX
.
• Each time you push the button, the display
changes as follows:
∗
During COOL (DRY) mode, (4) and (5) are not
displayed.
2-way Air Discharge Cassette, 1-way Air
Discharge Cassette Type (1YH series)
1
2
3
SET
TIME
TIMER SET
TEST
FILTER
LL
RESET
TEMP.
CL
FAN
SAVE
A
A
SWING/FIX
VENT
MODE
ON / OFF
UNIT LOUVER
T
Unit select
button
No
display
Louver No.
(1)
(2)
(3)
(7)
(6)
(5)
(4)
04
02
03
01
Refrigerant pipe
Drain pipe
Unit No. 1-2
Unit No. 1-1
Unit No. 1-3
No display
Unit No. 1-4
1, 2
3
SET
TIME
TIMER SET
TEST
FILTER
LL
RESET
TEMP.
CL
FAN
SAVE
A
A
SWING/FIX
VENT
MODE
ON / OFF
UNIT LOUVER
T
Unit No. 1-2
Unit No. 1-1
Unit No. 1-3
No display
Unit No. 1-4
Summary of Contents for MMU-AP0071MH
