No.
6
Part name
Drain p
an
Procedure
Remarks
1.
Detachment
1)
Carry out work of item 1 of
⑤
.
2)
Remove the cap drain and then drain the
water accumulated in the drain pan. (Fig. 12)
* When taking off the cap drain, be sure to
prepare a bucket, etc. for spilled water.
3)
Loosen the fixing screw
(
Ø5/32"(4mm)
x 0.4"
(
10mm)
6 pcs.
)
and
then remove
the drain pan. (Fig. 13)
2.
At
tachment
1)
Tighten the fixing screw to the drain pan
with the cabinet.
2)
Firmly insert cap drain to drain pan
.
(Fig. 12)
Drain pan
Cap drain
Drain pan
(Fig. 13)
7
Drain pump
1.
Detachment
1)
Carry out work of item 1 of
⑥
.
2)
Remove the drain pump connector
(CN504, White, 2P) connected to the control
3)
4)
5)
P.
C. board and then remove the lead wire
from the clamp.
Remove the band hose from the drain hose
in the direction of arrow. (Fig. 1
4
)
Remove the drain hose from drain pump
in
the direction of arrow. (Fig. 1
5
)
Loosen
the fixing screw
(Ø5/32"(4mm) x 0.4"(10mm) 3 pcs.)
and then remove the drain pump from
the
pump fixture. (Fig.
1
6
)
2. Atta
chment
1)
Tighten the fixing screw to the the drain pump
with the pump fixture.
2)
Insert
the drain hose to the drain pump.
Note :
Insert the drain hose up to the end of the drain
pump connecting part, apply band to the white
mark position of the hose.
3) Connect the drain pump connector (CN504,
White, 2P) to the control P.C. board and then
fix
it as before with the clamp.
Band hose
(Fig. 1
4
)
Drain hose
(Fig. 1
5
)
(Fig. 1
6
)
Pump fixture
Fixing screws
- 100 -
