Test
(1)
Room A
12:00
Mode
Fan Speed
Cool
Test
(2)
Room A
12:00
Return
Test mode stop.
No
Yes
(3)
Test mode
4
Push the [
ON / OFF] button to start
the test mode. The screen
(1)
shown in the
left appears. (The screen
(2)
appears when
the operation is stopped.)
→
Perform the test mode in the “Cool” or “Heat”
mode.
→
Temperature setting cannot be adjusted
during the test mode.
→
Check codes are displayed as usual.
5
When the test mode is finished, push the [
] / [
] button to select “1. Test
mode” on the “Field setting menu” screen,
then push the “
S
et
Set” [
F2
F2]
button.
The screen
(3)
appears.
→
Pushing the “
Ye
s
Yes” [
F1
F1]
button stops the test mode screen and
continues the normal operation.
NOTE
The test mode stops after 60 minutes and the
screen returns to the normal / detailed display.
- 33 -
