MR-2019/2018/MY-1034 UNPACKING AND INSTALLATION 2 - 4
2)
Make the copier upright.
Close the front cover, side cover, and bypass tray, and then
make the copier upright in the orientation shown in the illustra-
tion.
3)
Remove the OP gear cover and rubber feet from the bottom of
the copier.
Remove the screw and remove the OP gear cover.
Then, take off and remove the rubber feet.
4)
Install the second cassette unit to the copier.
If the second cassette unit is aligned to the copier, it can be
positioned automatically.
Hold the copier lightly to prevent it from toppling down and
secure the second cassette unit with four screws (M4
×
16).
5)
Remove the rear cover and connect the connector.
Remove the screw and remove the rear cover.
Then, connect the connector of the second cassette unit to that
of the copier.
6)
Attach the rear cover.
Attach the rear cover to its original position and secure it with
the screw (M4
×
12).
7)
Return the copier to the normal orientation.
When returning the copier to the normal orientation, gently
return it without giving a shock.
Rubber foot
OP gear cover
Rubber foot
