MR-2019/2018/MY-1034 DISASSEMBLY AND ASSEMBLY 5 - 6
M. Lower transport roller
(1)
Reverse self-weight gate removal
1) Remove the reverse self-weight gate.
(2)
Lower transport roller removal
1) Remove the E-ring.
2) Remove the gear.
3) Remove the bearing.
4) Remove the lower transport roller.
N. Paper exit sensor
(1)
OC mat removal
1) Remove the OC mat.
(2)
Paper exit sensor removal
1) Disconnect one connector.
2) Remove the paper exit sensor.
2. MR-2018
(1)
Rear cabinet disassembly
1) Remove four screws.
2) Remove the rear cabinet.
(2)
Remove the ADF.
1) Remove two screws, and remove the earth wire.
2) Disconnect the connector.
3) Remove the ADF unit.
1
4
1
2
3
3
1
No.
Part name Ref.
A
ADF motor
B
Pick-up roller, paper feed roller
C
Paper exit roller
D
Set sensor, scan front sensor
E
Transport roller
2
1
1)
2)
3)
1)
