ELECTRICAL ADJUSTMENTS
D3-4
2-16: SUB SHARPNESS
1.
2.
3.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (23) on the remote control to
select "SHARP".
Check if the step No. of SHARPNESS is "37".
Press the INPUT SELECT button on the remote control
to set to the AV mode. Then perform the above
adjustments 1~2.
2-17: H VCO
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (04) on the remote control to
select "H VCO".
Check if the step No. of H VCO is "04".
1.
2.
