background image

31

TV operation

Press MENU in the TV/VCR mode, then press 
or 

 to select LOCKS 

 menu.

To register password

Notes:

• If you forget the password, you cannot set the V-Chip.
• To avoid forgetting the password, write it down and keep in

the safe place.

Press 

 or 

 to display the password entering

mode.

1

2

Enter the same password again using Number
buttons (0–9) for safety, then press ENTER.

Now the password was registered
and LOCKS menu will appear on the
display.

4

Enter the password (4 digits) using Number
buttons (0–9), then press ENTER.

• If you put a wrong number, press

CANCEL

.

3

“ ” appears instead of the number.

Setting the V-Chip

An age limitation can be set to forbid children to watch programs according to
“TV RATING” and “MOVIE RATING” level set. To use the V-Chip function,
you must register a password.

To change password

Enter the new password using Number
buttons (0–9), then press ENTER.

2

In the LOCKS menu, press 

 or 

 to select

“NEW PASSWORD”, then press 

.

1

Enter the same password again using Number
buttons (0–9) for safety, then press ENTER.

3

Press RETURN to make the menu screen
disappear.

4

  

  

 

 

 

  

L O C K S

C O N F I R M   PA S S W O R D

[   0   -   9   ]   :   S E L E C T
E N T E R  :   S E T

R E T U R N   :   E N D

L O C K S

L O C K
    C H   L O C K
    V I D E O   L O C K

O F F

    G A M E   T I M E R

O F F

F R O N T   PA N E L  L O C K

O F F

N E W   PA S S W O R D

      :   S E L E C T

        :  A D J U S T
R E T U R N   :   E N D

 

      

  

  

  

   

      

   

   

    

ENTER

0–9

C

/

D

/

B

/

A

MENU

CANCEL

RETURN

 

      

   

   

    

 

   

      

   

   

    

 5U30101B [E]p31-37

4/1/05, 3:25 PM

31

Summary of Contents for MW 26G71





















































































Reviews: