19
Basic setup
Clock setting
The auto clock function will automatically set the built-in clock (Month, Day,
Year and Time) when the unit is connected to an antenna or cable system
and it is turned off. As the unit searches for a receivable station in your area
and it receives a broadcast signal for auto clock, the auto clock needs
several minutes to set itself.
Preparation:
• Connect the antenna or cable system.
• If you use a cable box, turn it on.
• Plug the AC power cord to the AC outlet.
Auto clock setting
Make sure the unit is turned off.
• If you press POWER, the Auto Clock
set is not effective.
1
Wait at least three minutes and press POWER.
Then press TV/VCR to select TV/VCR mode.
The POWER indicator will light.
2
Press DISPLAY to check the clock on the
screen.
3
If the clock is not set, check the antenna
condition. The Auto clock may not function
properly if the reception condition is not
good.
4
Auto clock adjustment
To set auto clock to OFF
POWER
DISPLAY
The Auto clock adjustment will be performed at
12:00 PM everyday if you turn off the unit.
• If you use a cable box and you want Auto Clock adjust
ment to be performed, the cable box must be left on.
• The Auto Clock adjustment is not effective when there is a
difference of more than 5 minutes exists between the
built-in clock time and the actual time.
When shipped from factory the AUTO CLOCK is set to “ON”.
But if you do not want auto clock set (Adjustment):
Press MENU, then press
or
to select
option.
1
Press or to select “AUTO CLOCK”.
2
Press
or
to select “OFF”.
3
Press MENU repeatedly until the menu
screen is cleared.
• When the AUTO CLOCK is set to
“OFF”, the Auto Clock adjustment
does not function.
• Set the clock manually
21
.
4
POWER
/ /
/
DISPLAY
MENU
CH 125
8 : 47
AM
MON
TV/VCR
00 : 00 : 00 SP
STEREO SAP
ENTER
SETUP
MENU
SETUP
MENU
/
/
/
/ MENU
CLOCK SET
ON/OFF TIMER
AUTO CLOCK
STANDARD TIME
DAYLIGHT
SAVING TIME
ON
ENTER
CLOCK SET
ON/OFF TIMER
AUTO CLOCK
STANDARD TIME
DAYLIGHT
SAVING TIME
/
/
/
/ MENU
ON
/
/
/
/ MENU
CLOCK SET
ON/OFF TIMER
AUTO CLOCK
STANDARD TIME
DAYLIGHT
SAVING TIME
OFF
ENTER
TV/VCR
TV/VCR
POWER
Notes:
• If the unit does not operate properly, or No key operation
(by the unit and/or the remote control): Static electricity,
etc., may affect the player's operation. Disconnect the AC power
cord once, then connect it again.
• The TV section has its own menu and also DVD section has
its own menu
53
.
• If no buttons are pressed for more than 60 seconds, the TV/VCR
menu screen will return to normal TV operation automatically.
5L00301C [E]p18-21
20/4/04, 16:12
19
