60
Function setup (DVD)
Temporary disabling of rating level by DVD disc
Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
It is up to you to decide whether to cancel the rating level or not.
Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit (see page 44).
If the DVD disc has been designed to temporarily
cancel the Rating level, the screen which follows
the “Reading” screen will change, depending on
which disc is played. If you select “YES” with the
ENTER key, “Your disc exceeds the parental
control level#.” screen will then appear.
If you wish to cancel the set rating level
temporarily, select “Parental Control Level” with
or
, then press ENTER. If the 4-digit
password at step 2 on page 59 has been set, the
password entering screen will appear as shown
in step 4.
Alternatively, if the password has not been set,
playback will commence. If you don’t know (or
have forgotten) the password, select “Cancel
Picture”.
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.
Note:
This temporary cancellation of rating level will be kept until the
disc is ejected.
When the disc is ejected, the original rating level will be set again
automatically.
1
Enter the password with Number buttons (0–9).
Then press ENTER.
If you interrupt the entering, press
RETURN
.
4
2
3
5
Your disc exceeds
the parental control level#.
Parental Control Level
Cancel Picture
/Enter/Return
Please enter the
4 digit password
9/Cancel/Return
Enter/0
-
Playback will commence if the entered
password was correct.
PLAY
ENTER
ENTER
0
8
7
9
6
5
4
3
2
1
ENTER
0–9
RETURN
PLAY
Reading
/
5Q10501A [E]p57-60
4/17/04, 12:00 PM
60
