TOSHIBA Pocket PC Flash Update Tool for e750 User's Guide
11
6
When the update completes, your e750 will automatically re-boot
7
Remove the device from the cradle.
8
And click
Exit
on the Flash Update Tool.
9
Install the Kernel ROM image file by repeating steps 2-8.
10
When you complete the installation of both the Boot ROM and Kernel ROM,
cold boot your e750 again and then proceed to next section.
When you update the ROM image and an error occurs, finish
the update and then reset the PDA.
Reconnecting to your PC
To reconnect the device to your PC:
1
On your PC, open
ActiveSync,
and then choose
File,
and then
Connection Settings
,
2
Click the
Allow USB connection
checkbox, and then click
OK
.
Getting connected window
Insert the e750 into the cradle and make sure here is a good connection to
