27
3-5 Sensitive, Aperture, and Shutter Calibration Procedure
Tools:
AC Adapter
SD Card with Calibration Firmware
Light Source : Light value is 12+/-0.1 EV; Color temperature is 5100+/-300K. (Fig. 3.5.1)
Fig. 3.5.1
Procedure:
1.
Install the SD Card with calibration firmware into camera. Close the card cover.
2.
Attach camera to AC Adapter. Keep pressing the MENU button and slide the Power switch to power on the
camera.
3.
“ADJ MENU” is displayed on LCD screen
as shown in
figure 3.5.2.
4.
Press the UP/DOWN button to select the item SENSITIVE. Then press the RIGHT button to enter SENSITIVE
menu. The Lens will move and SENSITIVE MENU is displayed on LCD screen as shown in figure 3.5.3.
5.
Put the camera in front of the Light Source. The distance between Lens and Light source is within 2cm. Then press
OK button to proceed with the adjustment automatically. If the adjustment is OK, it will display SUCCESS as
shown in figure 3.5.4. Press the LEFT button to return. If the LCD displays FAILURE as shown in figure 3.5.5, the
camera is NG.
Fig. 3.5.2
Fig. 3.5.3
Fig. 3.5.4
Fig. 3.5.5
6.
Press the UP/DOWN button to select the item APERTURE. Then press the RIGHT button to enter APERTURE
menu. The APERTURE MENU is displayed on LCD screen as shown in figure 3.5.6.
Summary of Contents for PDR-M500
Page 1: ...SERVICE MANUAL FILE NO 210 200316 DIGITAL STILL CAMERA PDR M500 CREATED IN TAIWAN AUG 2003 ...
Page 24: ...22 Fig 3 3 10 ...
Page 34: ...32 Fig 3 7 7 ...
Page 49: ......
