background image

1B. Lift the handset.

2B. Dial the access code (

# 1 2

)

_____.

3B. Dial the number to which calls

are to be forwarded.

4B. Dial 

#

.

To Use Call Forward Busy
(SYSTEM/DID):
1A. Press the 

CFSB

button.

2A. Dial 

0

(the only number to

which calls can be forwarded).

3A. Press the 

CFSB

button.

1B. Lift the handset.

2B. Dial the access code (

# 1 3

)

_____.

3B. Dial 

0

.

4B. Dial 

#

.

To Use Call Forward Busy/No
Answer (SYSTEM/DID):
1A. Press the 

CFSN

button.

2A. Dial 

0

(the only number to

which calls can be forwarded).

3A. Press the 

CFSN

button.

… or … (if the 

CFBN

button is not provided)

You will hear dial tone.

You will hear recall dial tone.

You will hear dial tone, and the number will be stored.

The CFSB LED will flash.

The CFSB LED will light steadily.

… or … (if the 

CFSB

button is not provided)

You will hear dial tone.

You will hear recall dial tone.

You will hear dial tone, and the number will be stored.

The CFSN LED will flash.

The CFSN LED will light steadily.

… or … (if the 

CFSN

button is not provided)

DIGITAL TELEPHONE

PERCEPTIONe

&

ex

10

Summary of Contents for PERCEPTION e


























































Reviews: