11
Inner pot
MAINTENANCE
WARNING
Do not wet the lid or the pot.
Do not wash the pot thoroughly. Do not immerse the bottom of the pot into the water and do not turn
over the pot while its bottom is wet.
Do not wet the cord.
It may cause a short circuit, an electric shock, and an accident.
Daily maintenance
Regarding the water slime (which is colored) or white stains
[
Do not use benzene, cleanser, or the scrubbing brush.
These will erode the surface or the coated fluorocarbon
- rasin.
[
Do not clean the pot with the dish washer or the dish
dryer.
Such appliances may distort the pot.
[
Do not wash it with the detergent.
The pot may be smelly.
According to the example on the left, these are
caused by the minerals in the water. So these are
not the changes of color or the bad smell caused by
the pot, and the peeling of fluorocarbon.
∗
Though here does not concern the health prob
lem, please be aware of the maintenance with the
citric acid according to the specified period.
Please
[
White particles (crystallized mineral)
[
The changes of water color to milky,
black or red, etc.
[
Rust-like spots (slightly rusty)
[
Roughness
[
Be aware of the pot cleaning.
If the dirt is left in the pot, there will be some noise
when boiling or it will cause the problem of pouring
water.
[
In case of not in use for a long time, please leave it
naturally dry after the maintenance.
Do not soak.
Inner pot
Wipe it softly with sponge
and wash it with water.
Clean it with citric acid
once a month or three
months.
Main body and its lid
Wipe it with damp cloth.
Filter
It is at the bottom of the pot.
Pull it out and clean it with
the brush.
Remove the water slime
from the inserted part.
When re-installing, push it
down firmly.
Inserted part
NENL13710000000 (11-12)
24/3/08, 13:53
11
