12
How to clean the pot with the citric acid
1
Put the water into the pot at the
level of maximum water. Then fill
about 50 grams of citric acid into
the water and close the lid.
2
Connect the power cord and
press the
TEMP.
CLEAN
button to select
“CLEAN”.
:
The CLEAN indicator (
) flashes and then
lights up to start cleaning.
[
It takes about 90 minutes for cleaning.
3
Unplug and pour out all the
water. Wipe away the dirt from the
pot and wash it with water.
4
To remove the smell of the citric
acid, fill the water at the level of
maximum water and select the
temperature of “98”. After that,
boil the water and then pour out
all the boiled water.
During the clean
:
The WARM and BOIL
indicators will flash.
The remained time of
the cleaning will flash
in the display of
minutes.
This means the pot
cleaning is finished.
:
WARM indicator,
BOIL indicator, and
display will flash
quickly.
NOTICE
After finishing cleaning the pot with the citric acid,
unplug. When connect the power cord next time, it
means cleaning the citric acid.
Before disconnecting the power cord, always press
the
TEMP.
CLEAN
button and select the temperature of “98”.
EMPTY
TIMER
CHLORINE
CLEAN
WARM
BOIL
REDUCE
EMPTY
TIMER
CHLORINE
CLEAN
WARM
BOIL
REDUCE
NENL13710000000
SPECIFICATIONS
Power supply
MODEL
Power consumption
Capacity
Type of water pouring
Outer volume
(Width x Depth x Height)
Weight
(Including the power cord)
Fuse temperature
220 - 240 V a.c. 50 - 60 Hz
PLK-25DL, 25VE, 25EL, 25FL and 25VF
PLK-30DL, 30VE, 30EL, 30FL and 30VF
PLK-25DLI, 25VEI, 25ELI, 25FLI and 25VFI
PLK-30DLI, 30VEI, 30ELI, 30FLI and 30VFI
Boiling 700 W
2.5 L
3.0 L
Pouring water with electric power
22.2 cm x 29.7 cm x 23.5 cm
22.2 cm x 29.7 cm x 25.9 cm
About 2.2 kg
About 2.3 kg
152°C and 157°C
NENL13710000000 (11-12)
25/3/08, 11:16
12
