Toshiba Pocket PC e830 User’s Guide
150
Advanced Settings
To change an advanced setting, select the desired setting and tap
OK
.
The default settings are as follows.
■
In the default setting for Home, the Security Mode is set to Non-secure
and, therefore, unspecified devices may be able to connect to Local
Device. It is recommended that you set the Security Mode to
Security
On
.
■
If you want to set the Connectability Mode to Non-connectable and
you are operating your Toshiba Pocket PC e830W in an environment
in which there are three or more operating Bluetooth devices, you
should also set the Discoverability Mode to Non-discoverable.
4.
Tap the
Options
menu, then
Local Device
.
The Device Information screen for Local Device appears.
To change the name of the device, enter the new name in the Device
Name box and tap
OK
.
■
The default device name is “Toshiba BT.”
■
The device name can be a maximum of 248 alphanumeric characters.
■
If the device name exceeds 248 alphanumeric characters, an error
message appears.
The Bluetooth environmental settings are now complete. Refer to the fol-
lowing for additional operations.
■
COM service, see "Using COM service" on page 153.
■
DUN/LAP service, see "Using DUN/LAP service" on page 154.
■
PAN service, see "Using PAN service" on page 155.
■
OPP service, see "Using OPP service" on page 157.
■
FTP service, see "Using FTP service" on page 160.
Discoverability
Mode
Connectability
Mode
Security Mode
Encryption
Office
Discoverable
Connectable
Security On
Yes
Mobile
Non-discoverable Non-connectable
Security On
Yes
Home
Discoverable
Connectable
Non-secure
No
Other
Discoverable
Connectable
Security On
Yes
Summary of Contents for POcket PC e830 Series
Page 199: ...Chapter 11 Optional Functions 199 ...
Page 228: ......
Page 229: ......
Page 230: ......