77
Learning the Basics
Using a compact disc drive
5.375 x 8.375 ver 2.4.0
narrow object to press the manual eject button located inside
the hole.
CAUTION: Never use a pencil to press the eject button. Pencil lead
can break off inside the computer and damage it.
Inserting compact discs
To insert a compact disc into the drive:
1
Make sure the computer is turned on.
2
Make sure the drive-in-use indicator light is off.
3
Press the drive’s eject button.
The disc tray slides partially out of the drive (about 1
inch).
HINT: The drive won’t open if the computer’s power is off.
4
Grasp the tray and pull it fully open.
Drive tray fully extended
5
Hold the disc by its edges and check that it is free of dust.