User’s Manual
8-9
Optional Devices
12. Set the keyboard brace into its groove and press down to secure the
latches.
13. Turn the computer upside down and replace the battery pack. (refer to
Chapter 6,
Power
)
14. Return your computer to the upright position.
15. Turn the computer on and check the memory.
Open the
System Properties
icon in the Windows
Control Panel
and click the
General
tab.
Removing memory module
To remove the memory module, make sure the computer is in boot mode
then:
1. Be sure the power is off and AC adaptor and all cables are
disconnected from the computer.
2. Turn the computer upside down and remove the battery pack. (refer to
Chapter 6,
Power
)
3. Follow the instructions 4 through 8 in “Installing memory module” to
appear memory module.
4. Push the latches to the outside to release the memory module. A spring
will force one end of the module up.
5. Grasp the sides of the memory module and pull it out, then replace the
insulator.
Q
If you use the computer for a long time, the memory modules and the
circuits located close to the memory modules will become hot. In this
case, let them cool to room temperature before you replace them. Or
you will get burnt if you touch any of them.
Q
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
