User’s Manual
4-8
Operating Basics
If you want to a more effect for the power management, you can select
another mode, the
High Power Savings
which can save the power than
the Normal Power Savings. To select it, follow the steps below.
1. Click the
Power Management
tab.
2. Select the
High Power Savings
in the Power Mode pull-down list.
3. Input a time in
Power Save Delay (Seconds)
.
Writing CDs on the CD-RW/DVD-ROM drive
The CD-RW/DVD-ROM drive lets you write as well as read CD-ROMs.
Observe the precautions in this section to ensure the best performance for
writing CDs. For information on loading and unloading CDs refer to the
Using the optical media drive
section.
Before writing or rewriting
Please observe the following points when you write or rewrite the data.
Q
We recommend the following manufacturers of CD-R and CD-RW
media. Media quality can affect write or rewrite success rates.
CD-R: TAIYO YUDEN CO., LTD.
MITSUBISHI CHEMICAL CORPORATION
RICOH Co., Ltd.
Hitachi Maxell Ltd.
CD-RW (Multi-Speed and High-Speed):
MITSUBISHI CHEMICAL CORPORATION
RICOH Co., Ltd.
CD-RW (Ultra-Speed):
MITSUBISHI CHEMICAL CORPORATION
TOSHIBA has confirmed the operation of CD-R and CD-RW media of the
manufacturers above. Operation of other media cannot be guaranteed.
Q
The actual number of rewrites to CD-RW is affected by the quality of the
disc and the way it is used.
Q
Be sure to connect the AC adaptor when you write or rewrite.
Q
Be sure to close all other software programs except the writing
software.
If the
No Power Savings
is selected, the audio controller always runs.
If the
High Power Saving
is selected, you need to play an audio file once
before you use a microphone or play an audio CD by the analog CD audio.
CD-R discs can be written to only once. CD-RW discs can be rewritten
many times.
